Electrical rope winch 990 kg RPE. Internally brake motor for compact dimensions Euro voltage 230/400 V 3-phase 50 Hz Protection IP 54 Slip clutch adjustable from 1 000 kg Very smooth running through helical gears Gear used in all mounting positions Spring pressure disc brake: integrated in the motor holds the load even during power failures Cable not included! Optional on request: Drum version with larger cable capacity Grooved for improved cable management Divider with 2nd cable outlet for simultaneous work with 2 cables Traversing operation Gear switch for limiting the rope distance in both directions Pendant control including control switch with emergency stop control and 2 m control line Contactor control with 42 V control voltage Slack rope switch Frequency converter for stepless speed control Operating voltage 230 V 1 phase 50 Hz 1 Pulling force 990 daN 2 Lifting speed 6.0 m/min. 3 Rope mm 8 4 Engine power kW 1.10 5 ED at 120 c/h 40 % 6 effective rope length 1./2./3. layer 10.2 / 23.0 / 37.4 m 7 Weight 76.0 kg (without rope) . Electrical rope winch 990 kg RPE 9-6.
REMASTRIP - Pulling unit. Opening the cable sheaves protection on the other side so that the pulley unit can be used as left and right version U-profile below the sheave for a safe cable guide Securing the protection against unauthorized removal Caution: Pulling unit may only be used for pulling in a horizontal direction. The lifting of loads is prohibited! . Pulling unit 220 V.