fbpx

Transportbandstillbehör.

  • REMASKIRT CB 195

    REMASKIRT CB 195 är ett avancerat system för transportband som hanterar dammiga, eller finkorniga material som gärna vandrar ut på sidan.

    Läs mer
  • REMASLEEVE KSB-E 60/CN

    REMASLEEVE KSB-E 60/CN. 1 Polymer basis DIN ISO 1629 NR/BR/SBR 2 Specific weight DIN EN ISO 1183-1 1.13 g/cm³ 3 Hardness DIN ISO 7619-1 60 Shore A 10 Colour Black . REMASLEEVE KSB-E 60/CN.

    Läs mer
  • REMASLEEVE VSB-E 40/CN

    REMASLEEVE VSB-E 40/CN. 1 Polymer basis DIN ISO 1629 NR/SBR 2 Specific weight DIN EN ISO 1183-1 1.04 g/cm³ 3 Hardness DIN ISO 7619-1 40 Shore A 10 Colour Black . REMASLEEVE VSB-E 40/CN.

    Läs mer
  • REMASLEEVE VSB-RE 40 ORANGE/CN

    REMASLEEVE VSB-RE 40 ORANGE/CN. 1 Polymer basis DIN ISO 1629 NR 2 Specific weight DIN EN ISO 1183-1 1.05 g/cm³ 3 Hardness DIN ISO 7619-1 45 Shore A 10 Colour Orange* *Please note that this is a product based on natural rubber and therefore deviations in colour may occur.4 . REMASLEEVE VSB-RE 40 ORANGE/CN.

    Läs mer
  • REMASLIDE ALOX

    REMASLIDE ALOX. Innovative low friction and abrasion-resitant surface made of highly wear-resistant ceramic (4 mm) Elastic rubber base (approx. 40 Shore A) Recommendation: 4 to 5 pieces TT-Fastening Units per bar type I ; . REMASLIDE ALOX KG-02-1220.

    Läs mer
  • REMASLIDE ATEX

    REMASLIDE ATEX. Antistatic Can be used in ATEX areas Low friction surface made of antistatic PE (10 mm black) Elastic rubber base (approx. 50 Shore A) Recommendation: 4 pieces TT-Fastening Units per impact bar type IV . Antistatic. REMASLIDE A KG-04.

    Läs mer
  • REMASLIDE ATEX

    REMASLIDE ATEX. Antistatic Can be used in ATEX areas Low friction surface made of antistatic PE (10 mm black) Elastic rubber base (approx. 50 Shore A) Recommendation: 4 pieces TT-Fastening Units per impact bar type IV . Antistatic. REMASLIDE A KG-04-1500.

    Läs mer
  • REMASLIDE PUR impact bars

    REMASLIDE PUR impact bars. Innovative low friction surface made of highly wear-resistant polyurethane (approx. 15mm red) Elastic PUR base (approx. 55 Shore A sliding surface approx. 90 Shore A) Recommendation: 4 or 5 pieces of TT-Fastening Units per bar type I ; . REMASLIDE BAR PUR KG-02 - 1500.

    Läs mer
  • REMATRACK

    REMATRACK. REMATRACK-500 UT.

    Läs mer
  • REMATRACK

    REMATRACK. REMATRACK-500 OT.

    Läs mer
  • REMATRACK accessories

    Spare and wear parts - REMATRACK. REMATRACK-500 IDLER MIDDLE PUR.

    Läs mer
  • TT-Fastening Units IV

    TT-Fastening Units IV. Torque: 60 Nm recommended Consists of forged TT-Fasteners with washer and self-locking nut Recommendation: 4 pieces TT-Fastening Units per impact bar . TT-Fastening Unit IV.

    Läs mer