fbpx

Produktförsäljning.

Gummiduk Kvarninfodringar Lågfriktionsmaterial Limmer och primers Material för slitageskydd Reparationsmaterial för gummi Siktduk Transportband Transportbandsskarvning Transportbandstillbehör Verktyg för gummiarbeten Vibrationsdämpare

  • REMASLEEVE VSB-RE 40 ORANGE/CN

    REMASLEEVE VSB-RE 40 ORANGE/CN. 1 Polymer basis DIN ISO 1629 NR 2 Specific weight DIN EN ISO 1183-1 1.05 g/cm³ 3 Hardness DIN ISO 7619-1 45 Shore A 10 Colour Orange* *Please note that this is a product based on natural rubber and therefore deviations in colour may occur.4 . REMASLEEVE VSB-RE 40 ORANGE/CN.

    Läs mer

  • REMASLIDE ALOX

    REMASLIDE ALOX. Innovative low friction and abrasion-resitant surface made of highly wear-resistant ceramic (4 mm) Elastic rubber base (approx. 40 Shore A) Recommendation: 4 to 5 pieces TT-Fastening Units per bar type I ; . REMASLIDE ALOX KG-02-1220.

    Läs mer

  • REMASLIDE ATEX

    REMASLIDE ATEX. Antistatic Can be used in ATEX areas Low friction surface made of antistatic PE (10 mm black) Elastic rubber base (approx. 50 Shore A) Recommendation: 4 pieces TT-Fastening Units per impact bar type IV . Antistatic. REMASLIDE A KG-04.

    Läs mer

  • REMASLIDE ATEX

    REMASLIDE ATEX. Antistatic Can be used in ATEX areas Low friction surface made of antistatic PE (10 mm black) Elastic rubber base (approx. 50 Shore A) Recommendation: 4 pieces TT-Fastening Units per impact bar type IV . Antistatic. REMASLIDE A KG-04-1500.

    Läs mer

  • REMASLIDE plate

    REMASLIDE Plates bygger på samma princip som REMALEN, men är betydligt tjockare, vilket lämpar sig bra för tuffare miljöer där materialansamling är ett problem.

    Läs mer

  • REMASLIDE PUR impact bars

    REMASLIDE PUR impact bars. Innovative low friction surface made of highly wear-resistant polyurethane (approx. 15mm red) Elastic PUR base (approx. 55 Shore A sliding surface approx. 90 Shore A) Recommendation: 4 or 5 pieces of TT-Fastening Units per bar type I ; . REMASLIDE BAR PUR KG-02 - 1500.

    Läs mer

  • REMASTEEL 60

    REMASTEEL 60. 1 Polymer basis DIN ISO 1629 BR/IR/SBR 2 Specific weight DIN EN ISO 1183-1 1.13 g/cm³ 3 Hardness DIN ISO 7619-1 60 Shore A 10 Colour Black . REMASTEEL 60.

    Läs mer

  • REMASTEEL 70

    REMASTEEL 70. 1 Polymer basis DIN ISO 1629 NR/BR 2 Specific weight DIN EN ISO 1183-1 1.09 g/cm³ 3 Hardness DIN ISO 7619-1 63 Shore A 10 Colour Black . REMASTEEL 70.

    Läs mer

  • REMASTRIP – Blades

    REMASTRIP - Blades. Blades top.

    Läs mer

  • REMASTRIP – Cable stripping system

    REMASTRIP - Cable stripping system. For stripping steel cables when preparing belt splices. The cutting device is designed for cable pitches of 10 - 25 mm and for diameters of 4.9 to 11.3 mm. . REMASTRIP cutting device left side version.

    Läs mer

  • REMASTRIP – Pulling unit

    REMASTRIP - Pulling unit. Opening the cable sheaves protection on the other side so that the pulley unit can be used as left and right version U-profile below the sheave for a safe cable guide Securing the protection against unauthorized removal Caution: Pulling unit may only be used for pulling in a horizontal direction. The lifting of loads is prohibited! . Pulling unit 220 V.

    Läs mer

  • REMATRACK CVX Compact V-Return Tracker

    REMATRACK lämpar sig för alla system med bandspårningsproblem. Designade för tunga transportörer med låg frigångshöjd.

    Läs mer